Submersible Slurry pumpKOSUN LSP series vertical slurry pumps are mainly used in environmental protection.

Mud GunMud guns are meant to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size.

Mud AgitatorKOSUN MA series mud agitator is part of the drilling fluid solid control equipment which is used to agitate and mix the drilling mud

KOSUN BEM shaker KOSUN elliptical motion shaker in balanced elliptical mode is especially effective while drilling.

Drilling Fluid Shale ShakerThe shale shaker is the first grade of solids control equipment in drilling purification system.

DesilterKOSUN desilter is used as the 3rd stage of drilling solids control system, for which the solids diameter to be separated ranges from 15 to 45 micons.

Centrifugal PumpKOSUN CP Series Centrifugal pump is used for transferring drilling mud. It can be used as feeding pump for desander, desilter etc.

Arctic Solids Control System

Mobile Solids Control System

Skid-mounted Solids Control System

Cone

Shaker Spring

ScreenScreen is an important and easily consumed part/wearing partof the shale shaker in oil drilling solids control system.

Electric Control SystemSCR system apllies “one for one” 、”one for two” method to control direct electric current machine to meet the demands of drilling rig transmission. The system adopts simulating or all-digital control、PLC treatment, which has the function of trouble diagnosis、real time monitoring、recording and printing, and data remote transmission connector.

Hi-G DryerKOSUN Hi-G shaker recovers drill fluids cuttings from water-based and oil-based drilling fluids, can make the proportion of the liquid phase in the drilling to below 10%, can significantly reduce the cost of the waste discharge, and is particularly effective in the oil base mud cuttings.
G-force linear motion up to 8 G .

Screw PumpThe screw pump is an ideal pump to feed decanter centrifuge, the fluids flow along with the shaft, inner flow speed is slow, capacity remains, pressure is steady, without vortex and agitating. The screw pump can also be used in the drilling waste management for wet mud and cutting transportation

Screw ConveyerScrew conveyer, commonly known as auger. It has horizontal, inclined and combined form, and it can be used with other transport devices, to accomplish combined transport, separate transport, mixing, blending, dehydration, compounding, discharging and stacking, etc. KOSUN screw conveyer used in the drilling waste management for the drilling fluids or cuttings transportation.

Vertical CentrifugeIn the request for improved environmental practices, operators need solutions that take liquids/solids separation to a new level. The Vertical Centrifuge from KOSUN incorporates a high-speed vertical dryer that achieves maximum liquids/solids separation in large-volume processing. This gives operators a critical advantage in meeting increasingly stringent environmental regulations for onshore and offshore cutting disposal.

Ignition DeviceKOSUN electronic ignition device for relief combustible gas is a device used in refinery and natural gas gathering station to deal the tail gas and relief natural gas. It is a safe environmental equipment as it can remove the danger brought by the relief combustible gas to the environment.

Mud/Gas SeparatorMud/Gas Separator is the special equipment of degassing the gas-invaded mud at the first grade. It is mainly used to remove big bubbles with diameter above φ3mm and these bubbles refer to the expanded gas in the fluid that fill in some parts of well annulus. Well kick even spilling out to the rotary table will easily occur if they are not removed.

CampThe boundary dimension of the residential house:(length×width×height)8000*2500*2570mm(the interior net storey height is 2200mm)