The solids control system is the equipment and system that processes and recovers the drilling fluid (mud) returned to the surface from the wellhead.

Mud linear shale shaker: As the first-level solids control equipment for drilling fluid treatment, it is used to remove cuttings and other harmful solid particles in the drilling fluid. The drilling fluid selects different numbers of screens to control the size of the particles, mainly Solid phase particles larger than 74 microns.

Cyclone separator (desander, desilter): Desander is a secondary solids control equipment for drilling fluids. Desander mainly removes sand particles larger than 44~74 microns. The desilter is mainly used for three-stage purification of drilling fluid, and the desilter is mainly used for mud solid particles above 15-44 microns. Microcyclones can also be selected according to the actual conditions of the drilling fluid, which are mainly used to separate mud solid particles above 2 to 4 microns.

Drilling fluid centrifuge: The function is to control the clay particles in the well fluid, control the solid phase of the drilling fluid, remove the solid phase content of the non-aggravated drilling fluid, and recover the barite in the aggravated drilling fluid. The drilling fluid centrifuge mainly acts on solid particles of 2 to 4 microns.

Vacuum Degasser: The vacuum degasser is mainly used to remove the gas invading the drilling fluid.

The solids control system can effectively separate the large drill cuttings, barite and other large solid particles returned to the surface (mud) from the wellhead, and the treated drilling fluid (mud) can be reused. This reduces the cost of drilling and is conducive to environmental protection.

KOSUN- China Solids Control Leader&Drilling Waste Management Expert

Email: sales2@adkosun.com

Wechat:+86 18792396268

Contact person: Lily Wang

Online consulting:

http://www.kosun.com

http://www.kosuneco.com