KOSUN Solid control system is the five-level solid control equipment, security equipment and other auxiliary equipment according to their separation effect in an orderly combination. The system is based on mud tank
Carrier, drilling fluid carrying drilling cuttings directly into the shaker through the shunt pipe, the shaker will contain large particles of drilling cuttings (74um or more)Out, the treated drilling fluid containing smaller particles is sieved into the mud tank. If the mud contains steam bubbles, it can be negated by a vacuum degasser Pressure draws mud into the tank for liquid-gas separation. After the liquid-gas separation, the mud is transported through the sand pump into the sand removal and mud removal cleaner, which is hydraulically rotated Under the action of the fluid, the mud is separated again. The sand cyclone can separate 44-74μm solid particles, and the mud cyclone can separate 15-44μm solid particles, the treated mud through the cyclone overflow pipe into the centrifuge liquid supply bin, the fifth stage separation, horizontal spiral sedimentation centrifuge,The machine through the liquid slurry pump (screw pump) to supply liquid, using the principle of centrifugal sedimentation will be 2-15μm above the solid particles separated. Each mud tank has inside In the process of drilling operation, drilling fluids with different separation effects can be extracted according to different needs. The system is equipped with jet mixing device Mixing can be done as required.
The advantages of KOSUN'S equipment are as follows:
1, modular design, small footprint, flexible arrangement and installation according to customer requirements;
2, mud tank side plate corrugated bearing type design, can withstand greater load, service life of more than 10 years;
3, tank bottom plate design Angle, facilitate the removal of sedimentary mud;
4. The whole process design of the system meets the treatment requirements of different working conditions and mud systems, and meets the functions of 5-level purification, degassing and chemical mixing;
5, can use a variety of drilling conditions, can meet the low temperature, high temperature, sand, corrosive working environment, to meet the onshore, offshore drilling operations;
6, fluid equipment with anti-corrosion wear design;
7, equipment maintenance and disassembly is simple, equipped with professional tools;
8, can meet the long-distance railway, sea transport;
9, the system adopts centralized control, can achieve centralized and nearby two control modes;
KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
WhatsApp/Wechat:+86 13379250593
Contact person:Stella Xiang
Online consulting:
http://www.kosun.com
http://www.kosuneco.com
